H3C模拟器使用记录

Q1：PC不能正常PING通，PC端口处于down状态

HCL模拟器实现交换机DHCP配置案例

配置步骤

（1）将交换机的名字修改为SW1

（2）在交换机分别创建VLAN 10、VLAN 20

（3）VLAN 10的IP设置为：192.168.10.1 255.255.255.0

（4）VLAN 20的IP设置为：192.168.20.1 255.255.255.0

（5）将F0/1端口划分到VLAN 10

（6）将F0/2端口划分到VLAN 20

（7）开启DHCP功能

（8）分别创建两个地址池，分配子网、默认网关、DNS

（9）PC_2和PC_3都能通过DHCP自动获取IP地址

配置关键点

将交换机的名字修改为SW1：

system-view

System View: return to User View with Ctrl+Z.

[h3c]sysname sw1

#创建vlan

[sw1]vlan 10

[sw1-vlan10]vlan 20

[sw1-vlan20]quit

[sw1]dis vlan brief

#给vlan 设置IP地址

[sw1]int vlan 10

[sw1-Vlan-interface10]ip address 192.168.10.1 24

[sw1-Vlan-interface10]quit

[sw1]int vlan 20

[sw1-Vlan-interface20]ip address 192.168.20.1 24

[sw1-Vlan-interface20]quit

#端口划分到vlan 10 vlan 20

[sw1]int GigabitEthernet 1/0/2

[sw1-GigabitEthernet1/0/2]port link-type access

[sw1-GigabitEthernet1/0/2]port access vlan 10

[sw1-GigabitEthernet1/0/2]quit

[sw1]int GigabitEthernet 1/0/3

[sw1-GigabitEthernet1/0/3]port link-type access

[sw1-GigabitEthernet1/0/3]port access vlan 20

[sw1-GigabitEthernet1/0/3]quit

开启DHCP功能

[sw1]dhcp enable

创建DHCP地址池，命名为VLAN10，分配网段、子网掩码、默认网关、DNS

[sw1]dhcp server ip-pool vlan10

[sw1-dhcp-pool-vlan10]network 192.168.10.0 mask 255.255.255.0

[sw1-dhcp-pool-vlan10]gateway-list 192.168.10.1

[sw1-dhcp-pool-vlan10]dns-list 114.114.114.114

[sw1-dhcp-pool-vlan10]quit

[sw1]dhcp server ip-pool vlan20

[sw1-dhcp-pool-vlan20]network 192.168.20.0 mask 255.255.255.0

[sw1-dhcp-pool-vlan20]gateway-list 192.168.20.1

[sw1-dhcp-pool-vlan20]dns-list 114.114.114.114

[sw1-dhcp-pool-vlan20]quit

[sw1]save